An international study further indicates that both consumers and job applicants are increasingly attaching importance to Solar energy in Australia sustainable image. With solar panels, you make your ecological commitment very concretely visible in Solar Panel in Australia.
The main conditions
Enough space
For your business to receive aid in Flanders, the power of your PV installation must be greater than 25 kWp. Solar energy in Australia things are somewhat different. In Wallonia, you can benefit from aid provided that the power of your installation is greater than 10 kWp. On the other hand, there is no limit in the Brussels-Capital Region. This means that to benefit from a bonus, you must have an available surface area of at least 40 m² in Wallonia and at least 150 m² in Flanders.
For illustration:
for a medium-sized installation with a power of 250 kWp (annual production of around 230 MWh), you need, depending on the type of roof, from 1,000 (sloped roof) to 1,600 m 2 (flat roof) of available space. For a similar installation, you will need approximately 1,100 m 2 in this case.
Good location
The quantity of electricity produced by your panels depends in particular on their exposure to the sun. For a sloping roof, the ideal is an orientation towards the south, south-east or south-west.
This is less important for installation on a flat roof or on the ground. On a flat roof, solar panels are often oriented east/west so that they can capture solar radiation throughout the day. On the ground, you can even use a tracking system so that the panels follow the path of the sun in Solar Panel in Australia . This significantly increases yield (up to 35%).
In all cases, you must take into account the shadow cast by surrounding buildings and that of solar panels. Determining the ideal place to install the panels is therefore a very precise job that is best always entrusted to specialists in Solar companies in Australia .
Building permit
When you install solar panels on your roof, you generally do not need a permit. On a sloping roof, however, the panels must have the same inclination as the rest of the roof. For flat roofs, solar panels cannot extend more than one meter from the edge of the roof. You will need to apply for planning permission if you want to install solar panels on other parts of your site such as a carport or on the ground. For protected buildings, special rules also apply.
As a precaution, it is always better to contact the town planning department of your municipality beforehand.
Stability
Your roof must of course be able to support the weight of the solar panels and all mounting hardware. The method of attaching the panels depends on the type of roof. But to ensure safety, they are always installed so that they can withstand winds of up to 130 km/h. So, take into account that your roof must be able to support at least 25 kg/ m2. A stability study is also mandatory. Just like the inspection of your electrical installation by your network manager Solar Panel Sydney. If you want to install solar panels on the ground, you will need a hard surface.
Recommended by :What Makes Webwolfs Ecommerce Website Design New York Unique?